Sony HDW-M2000 - Manual (Page 137)

Appendix
Appendix
A-5
AUDIO OUTPUT CH1/2/3/4
XLR 3-pin, male (4)
+4 dBm at 600
Ω load, low
impedance, balanced
CUE OUT XLR 3-pin, male (1)
+4 dBm at 600
Ω load, low
impedance, balanced
AUDIO OUTPUT (AES/EBU) CH1/2, 3/4, 5/6, 7/8
BNC (4)
Complies with AES-3id-1995
(CH1/2 and CH3/4 only for HDW-
2000)
MONITOR OUTPUT (L/R)
XLR 3-pin, male (2)
+4 dBm at 600
Ω load, low
impedance, balanced
TIME CODE OUT
XLR 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
PHONES JM-60 stereo phone jack
–
∞ to –12 dBu at 8 Ω load,
unbalanced
Remote connectors
CONTROL PANEL
10-pin (2), female
Front/rear selectable
REMOTE 1-IN(9P)
D-sub 9-pin, female
REMOTE 1-OUT(9P)
D-sub 9-pin, female
RS-232C D-sub 9-pin, male
VIDEO CONTROL(15P)
D-sub 15-pin, male (for optional
BVR-50/50P)
VIDEO CONTROL(9P)
D-sub 9-pin, female (for optional
HKDV-900)
REMOTE 2 PARALLEL I/O(50P)
50-pin, female
Memory card insertion slot
PCMCIA
Accessories supplied
PSW 4
× 16 screws for rack mounting (4)
Operation Manual (1)
Installation Manual (1)
Optional accessories
RCC-5G 9-pin remote control cable (1)
BVR-50/50P Video Remote Control Unit
HKDV-900 Video Remote Control Unit
RMM-131 Rack Mount Adaptor
BCT-HD12CL Cleaning Cassette Tape
AC power cord
• For customers in the U.S.A. and Canada
Part No. 1-557-377-11
Plug holder 3-613-640-01
• For customers in the United Kingdom
Part No. 1-782-165-11
Plug holder 3-613-640-01
• For customers in European countries other than the
United Kingdom
Part No. 1-782-164-11
Plug holder 3-613-640-01
Design and specifications are subject to change
without notice.
To prevent electromagnetic interference
from portable communications devices
The use of portable telephones and other
communications devices near this unit can result in
misoperations and interference with audio and video
signals.
It is recommended that portable communications
devices near this unit be powered off.