Sherwood R-925 - Manual (Page 14)

ENGLISH
MEMO / ENTER
MEMO / ENTER
SPEAKER
MODE
SPEAKER
MODE
Memorize the desired subwoofer mode
while it flickers.
6
14
Memorize the desired center speaker mode
while it flickers.
4
The desired center speaker mode is memorized and
then it becomes the subwoofer mode.
If the center speaker display goes off, repeat again
from the above step 2.
Each time this button is pressed,the subwoofer
mode changes and flickers as follows;
YES : When using a subwoofer.
NO : When not using a subwoofer.
If the subwoofer display goes off, repeat again from
the above step 2.
Each time this button is pressed briefly, the setting
of the center speaker or the subwoofer is displayed.
Select the desired subwoofer mode.
5
Checking the speaker setting
Adjusting the speaker settings
Press the SPEAKER MODE button for more than 2
seconds to enter the center speaker mode.
2
Select the desired center speaker mode.
3
Adjusting the setting of the center speaker and the
subwoofer connected.
In the THEATER, HALL, STADIUM, CHURCH or
normal stereo mode, it will become the subwoofer
mode directly.
Each time this button is pressed, the center speaker mode
changes and flickers as follows;
: When using a relatively large center speaker.
: When using a relatively small center speaker.
: When not using a center speaker.
In the Dolby 3 Stereo mode, the NONE mode can not be
selected.
SPEAKER
MODE
SPEAKER
MODE
LARGE
SMALL
NONE