Sherwood R-925 - Manual (Page 21)

21
The audio signal from CDP and the video
signal from LDP will be dubbed onto the
tape in VCR 1 and you can enjoy them on
TV set and from the speakers.
Start play on the LDP.
7
Start play on the CDP.
8
Start recording on the VCR 1.
6
Compressing the dynamic range
(Dolby DIGITAL(AC-3) mode only)
This function compresses the dynamic range of
previously specified parts of the Dolby
DIGITAL(AC-3) sound track(with extremely high
volume) to minimize the difference in volume
between the specified and non-specified parts.
This makes it easy to hear all of the sound track
when watching movies at night at low levels.
Then the DYNAMIC RANGE indicator lights up.
Press again to cancel.
In some Dolby DIGITAL(AC-3) softwares, this
function may not be used.
DYNAMIC RANGE
OTHER FUNCTIONS
Operating the sleep timer
The sleep timer allows the system to continue to operate
for a specified period of time before automatically
shutting off.
To set the receiver to automatically turn off after the
specified period of time.
When the sleep time is selected, all display panels of
Sherwood components connected by the DIGILINK
are dimly lit.
10 20 30 60 90 OFF
Unit : Minutes
SLEEP
SLEEP
or
Checking the brightness of the
fluorescent displays
Each time this button is pressed,
the brightness of all fluorescent
displays of Sherwood
components connected by the
DIGI LINK III changes together
as follows;
ON dim OFF
In the above step, if it elapses 5 seconds, repeat
again from the step 1.
Memorize it within 5 seconds.
5
MEMO / ENTER
DISPLAY
SYS
Each time this button is pressed, the sleep time changes
as follows ;
In the display OFF mode, when any button is pressed,
the receiver switches to the display ON mode.
ENGLISH
VCR1
LDP
SOURCE
REC
VIDEO SOURCE AUDIO SOURCE