Sherwood R-925 - Manual (Page 16)

ENGLISH
16
LISTENING TO RADIO BROADCASTS
Manual tuning
Each time this button is pressed, the band is
changed to FM or AM.
When pressing the BAND button without
selecting the TUNER, the tuner will be selected
automatically and operate.
Then AUTO appears on the display. The tuner will
now search until a station of sufficient strength has
been found. The display shows the tuned
frequency and “TUNED”.
If the station found is not the desired one, simply
repeat this operation.
Weak stations are skipped during auto tuning.
Frequency direct tuning
Auto tuning
Examples)
FM 89.10MHz :
FM 100.70 MHz :
AM 890 kHz :
AM 1030 kHz :
In FM band, If “1” is pressed on the first dight,
“10” is entered.
With the numeric button on the remote control, you
can also enter the frequency.
In each digit, if it elapses 7 seconds, press the
FREQUENCY DIRECT button again to enter the
frequency.
Manual tuning is useful when you already know the
frequency of the desired transmitter.
Press TUNING - or + for more than 0.5
second.
3
Select the tuner.
1
Select the desired band.
2
Enter the frequency within 7 seconds for
each digit.
4
Press TUNING - or + repeatedly until the
right frequency has been reached.
3
Enter the frequency direct tuning mode.
3
BAND
TUNING TUNING
TUNING TUNING
FREQ.DIRECT
INPUT SELECTOR/
INDEX
or
TUNER
8 9 1
1 0 7
1 0 7
8 9
1 0 3
BAND FREQUENCY