Sherwood R-925 - Manual (Page 15)

ENGLISH
15
Check the delay time to be adjusted.
10
Adjust the volume level of the rear speakers
relative to that of the front speakers.
7
Adjust the delay time.
11
Memorize the delay time.
12
• The delay time will be displayed for 5 seconds.
• In Dolby DIGITAL(AC-3) mode, the corresponding
delay time will be flickering.
• The center delay time can be adjustable only in Dolby
DIGITAL(AC-3) mode.
• The rear delay time can be adjustable only in Dolby
DIGITAL(AC-3) and Dolby Pro Logic modes.
Each time this button is pressed, the delay time
changes in regular intervals.
If the delay time disappears, start from the step 10
again.
In Dolby Pro Logic mode, the
rear delay time can be
memorized without pressing
the DELAY TIME button.
In Dolby DIGITAL(AC-3) mode, repeat
the above steps 11 and 12 to adjust the rear
delay time.
13
– REAR LEVEL +
or REAR LEVEL
D.TIME
D.TIME
AD JUST
In THEATER, HALL, STADIUM or
CHURCH Mode
Press the TEST TONE button to adjust the
volume level of each speaker.
7
Cancel the test tone function.
9
Adjust the volume levels of the speakers
until they all sound equally loud.
8
Test tone will be heard form each speaker for 2
seconds each as follows;
FRONT L CENTER FRONT R REAR R REAR L SUB
The test tone will be heard from the subwoofer only
when subwoofer is set to “YES” in the Dolby
DIGITAL(AC-3) mode.
Test tone is not heard from rear speakers in Dolby 3
Stereo mode.
Test tone is not heard from center speaker when the
center speaker setting is adjusted to the NONE
mode.
The rear L and R volume levels are adjusted
respectively during the test tone function and all
together while enjoying surround sounds.
T.TONE
T.TONE
- CENTER LEVEL +
- REAR LEVEL +
or
CENTER LEVEL
REAR LEVEL
SURBWOOFER LEVEL
SUBWOOFER
In Dolby DIGITAL(AC -3), Dolby Pro
Logic or Dolby 3 Stereo mode