Samsung SCLSeries - Manual (Page 6)

SCL Series
NO ITEMS TEST CONDITION PERFORMANCE
6
TEMPERATURE
STABILITY
THE CAPACITOR SHALL BE SUBJECTED IN TURN TO PROCEDURES SPECIFIED
BELOW
7 SURGE TEST
THE CAPACITOR SHALL BE SUBJECTED TO THE SURGE
VOLTAGE AS SPECIFIED ON NEXT PAGE IN A CYCLE OF 6±
0.5 MIN. WHICH CONSISTS OF 30±5 SEC. FOLLOWED BY A
DISCHARGE PERIOD OF APPROX. 5 MIN 30 SEC. AT A
TEMPERATURE OF +85℃ FOR 1,000 CYCLES.
AND THE CAPACITOR SHALL BE STORED UNDER
STANDARD ATMOSPHERIC CONDITIONS TO OBTAIN
THERMAL EQUILIBRIUM AFTER MEASUREMN\ENT.
MEASURING CIRCUIT
WHERE
R1 : PROTECTIVE SERIES RESISTOR (33Ω)
R2 : DISCHARGE RESISTOR( 33Ω)
Cx : TEST CAPACITOR
V : DC VOLTAGE
S : SWITCH
STEP TEMP. DURATION
CHANGE IN
CAPACITANCE
( ΔC )
TANGENT OF
LOSS ANGLE
(D.F.)
LEAKAGE
CURRENT
1 25±2℃
WITHIN
SPECIFIED
TOLERANCE
TABLE 1 ON
PAGE 13
WITHIN
ORIGINAL
LIMIT
2 2 HOURS.
- 10 TO 0% OF
INITIAL VALUE
TABLE 1 ON
PAGE 13
N/A
3 25±2℃ 25 MIN.
4 2 HOURS.
0 TO +10% OF
INITIAL VALUE
TABLE 1 ON
PAGE 13
WITHIN 10X
ORIGINAL
LIMIT
5 2 HOURS.
0 TO +12% OF
INITIAL VALUE
TABLE 1 ON
PAGE 13
WITHIN 12.5X
ORIGINAL
LIMIT
-55 ℃
0
-3
+85 ℃
+3
0
+125 ℃
+3
0
RATED VOLTAGE 2.5V 4V 6.3V 10V 16V 20V 25V 35V
SURGE VOLTAGE 3.1V 5V 8V 13V 20V 26V 32V 45V
V
+
-
R1
R2
S
Cx
+
-