Samsung SCLSeries - Manual (Page 8)

SCL Series
NO ITEMS TEST CONDITION PERFORMANCE
10
ADHESION
(ELECTRODE
PEELING
STRENGTH)
A STATIC LAOD OF 19.6N USING A R0.5 SCRATCH
TOLL SHALL BE APPLIED ON THE CORE OF THE
COMPONENT AND IN THE DIRECTION OF THE ARROW
AND HOLD FOR 5 SEC. THE TEST BOARD SHALL BE
IEC 40(S)541. HOWEVER THE BASE MATERIAL SHALL
BE G-10 or FR-4 (ANSI GRADE)
THERE SHALL BE NO
EVIDENCE OF
MECHANICAL DAMAGE.
ELECTRICAL
CHARACTERISTICS
SHALL SATISFY THE
INITIAL REQUIREMENT.
IF THERE ARE
ELECTRODES ON BOTH
SURFACES, IT SHALL
SATISFY THE ABOVE
REQUIREMENT ON
WHICHEVER SURFACE
IT MAY BE FIXATED ON.
11
CORE BODY
STRENGTH
A ROD OF 9.8N USING A R0.5 PRESSURE ROD SHALL
BE APPLIED TH THE CENTER IN THE DIRECTION OF
THE ARROW AND HOLD FOR 10 SEC THERE SHALL BE NO
EVIDENCE OF
MECHANICAL DAMAGE.
ELECTRICAL
CHARACTERISTICS
SHALL SATISFY THE
INITIAL REQUIREMENT.
Scratch tool
R0.5
Board
Chip
Chip
R0.5
0.5L
Chip
Pressure
W
L
L＞W