Troubleshooting – Sony NW-A3000 Series User Manual

Page 76

Advertising
background image

NWA1000/NW-A3000.GB.2-683-714-11(1)

Troubleshooting

Troubleshooting

76

76

Troubleshooting

If the player does not function as expected, try the following steps to resolve
the issue.

1

Reset the player by pressing the RESET

button with a small pin.
The tracks and settings stored on the player are not
affected by resetting the player. No information is
erased.

2

Check the symptoms in “Troubleshooting.”

3

Check for information about the issue in SonicStage or CONNECT

Player.

4

Look for information about the issue on one of the support Web

sites ( page 98).

5

If the approaches listed above fail to resolve the issue, consult

your nearest Sony dealer.

Power

Symptom

Cause or corrective action

The lamp of the USB

cable does not light.

 The terminals of the USB adaptor are dirty. Wipe

them with a soft, dry cloth.

 The player is not connected to the USB cable.

Insert the USB cable straight into the port until it is

firmly seated. Make sure that the lamp of the USB

cable lights up.

The player turned off

automatically.

 The player turns off if left in pause mode for a few

minutes. Press any button other than the HOLD

button to turn the player on.

Battery life seems short.

 The operating temperature is below 5°C (41°F).

This is due to the battery characteristics and not a

malfunction.

 You have not used the player for a prolonged

period. Efficiency of the battery will be improved

by repeatedly charging and discharging.

 The battery needs to be replaced. Consult your

nearest Sony dealer.

 The battery has not been given enough time to

charge fully. Keep charging the battery until

appears.

Continued

Table of

Contents

Index

Menu

Advertising
This manual is related to the following products: