Sony J30SDI - Manual (Page 18)

Chapter 2
Location and Function of Parts
Chapter 2 Location and Function of Parts
2-7
• If the unit carries out reverse playback in the shuttle
mode at –0.5 times or less normal speed for 20
consecutive minutes, the reel motor heat protection
circuit automatically functions and the unit enters still
mode.
2-1-3 Tape Transport Control
Section
1 EJECT button
Press this button to eject the cassette.
2 REW (rewind) button
To rewind the tape, press this button. The REW
indicator in the display section lights. When you are
using a tape containing shot marks, press this button
while holding down the SHIFT button to cue-up a shot
mark position in the reverse direction.
3 PLAY button
To start playback, press this button. The PLAY
indicator in the display section lights.
When you are using a Betacam/Betacam SP/Betacam
SX tape containing shot data, press this button while
holding the SHIFT button to display shot data (see
page 2-4).
When you are using a Digital Betacam/MPEG IMX
tape containing UMID, press this button while holding
the SHIFT button to display UMID (see page
5-2).
To clear the shot data or UMID, again press this button
while holding down the SHIFT button.
4 F FWD (fast forward) button
To start fast forwarding the tape, press this button. The
F FWD indicator in the display section lights. When
you are using a tape containing shot marks, press this
button while holding down the SHIFT button to cue-up
a shot mark position in the forward direction.
5 STOP button
To stop playback, press this button. The STOP
indicator in the display section lights.
If REFERENCE SYSTEM ALARM, extended menu
item 105 of the setup menu, has been set to ON, this
button flashes when the external reference video signal
is not supplied.
6 STANDBY on/off button
When a cassette is inserted in the unit and the unit is in
the Stop mode, you can toggle the VTR standby mode
on and off by pressing this button.
In standby mode, the drum rotates and the tape sticks
to the drum. As a result, playback starts immediately.
If the unit is set to 8 minutes elapse (this value can be
varied using STILL TIMER extended menu item 501
of the setup menu) in standby mode, it automatically
switches out of standby mode to protect the tape.
1 EJECT button
2 REW button
3 PLAY button
4 F FWD button
5 STOP button
6 STANDBY
on/off button