Sharp R-21AT - Manual (Page 13)

11
A30317, SUK R-21AT O/M
MEMORY CHECK
CHECK
CHECK
CHECK
CHECK
NO. CHECK
NO.
Step Procedure
Press the CHECK pad. 1
You can check the information programmed into the memory.
CHECKING TIME AND POWER LEVEL
Example: If you want to know the information programmed into the memory 1, memory 1 has been programmed for
4 minutes on 60% for the 1st sequence and 2 minutes on 30% for the 2nd sequence.
Display Pad Order
NO. will flash on and off.
2
After about 1 sec.
Note: 1. To cancel MEMORY CHECK, press the CHECK pad.
2. When is displayed at Step 1, the memory is not set.
3. To check the time constant for double quantity, press the DOUBLE QUANTITY pad and the desired
NUMBER pad in step 2.
Press the NUMBER pad .
REPEAT