Sanyo PDP-32H1EN - Manual (Page 12)

12
CONNECTING PLASMA MONITOR
Y Pb /Cb Pr /Cr
VD HD R B G
S-VIDEO
S-VIDEO R-AUDIO-L R-AUDIO-L R-AUDIO-L
R-AUDIO-L(MONO)
VIDEO
VIDEO
VIDEO
AUDIO(R/L) D-SUB
PC IN
COMPONENT/RGB IN
VIDEO1 IN
VIDEO2 IN MONITOR OUT
Connect analog RGB signal outputs or
component video outputs to these jacks.
Connect analog RGB signal outputs to R,
G, B, HD and VD jacks. (Refer to P15.)
Connect component video outputs to Y,
Pb/Cb and Pr/Cr jacks. (Refer to P14.)
●
RGB/COMPONENT (BNC-type)
●
AUDIO R and L (RCA-type)
COMPONENT/RGB INPUT JACKS
Connect computer outputs to this
terminals. (Refer to P15.)
●
RGB (D-SUB)
●
AUDIO R/L (Stereo Mini Jack)
PC INPUT TERMINALS Connect video and audio outputs from
video equipment. (Refer to P13.)
●
S-VIDEO (Mini DIN 4-type)
●
VIDEO (RCA-type)
●
AUDIO R and L(MONO) (RCA-type)
VIDEO1 INPUT JACKS
Connect another monitor, video
recorder or external audio amplifier
to these jacks. (Refer to P13~15.)
●
VIDEO (RCA-type)
●
AUDIO R and L (RCA-type)
MONITOR OUTPUT JACKS
Connect video and audio outputs from
video equipment. (Refer to P13.)
●
S-VIDEO (Mini DIN 4-type)
●
VIDEO (BNC-type)
●
AUDIO R and L (RCA-type)
VIDEO2 INPUT JACKS
BACK
✽✽
SEE NOTE BELOW
✽✽
NOTE : Those terminals are not provided on model PDP-32H1EN.