Sanyo PDP-32H1EN - Manual (Page 22)

22
BASIC OPERATION
SELECTING INPUT SOURCE
INPUT button
MENU
OK
INPUT
VOLUME
MUTE
WIDE
INPUT
ON-OFF
VOLUME PC/RGB
COMPONENT
OFF TIMER
PICTURE MOVE UP
VIDEO
VIDEO
button
VIDEO INPUT
Select either "AV 1 (VIDEO 1)" or "AV 2 (VIDEO 2)" by pressing
VIDEO button on Remote Control Unit.
(Refer to "CONNECTING TO VIDEO EQUIPMENT" on Page 13.)
AV 1
AV 2
COMPONENT INPUT
Select "COMPONENT" by pressing COMPONENT button on Remote
Control Unit.
(Refer to "CONNECTING TO COMPONENT VIDEO EQUIPMENT" on
Page 14.)
COMPONENT
PC/RGB INPUT
Select "PC" or "RGB 1" by pressing PC/RGB button on Remote
Control Unit.
(Refer to "CONNECTING TO COMPUTER" on Page 15.)
PC
RGB 1
FRONT CONTROL OPERATION
Choose either input mode by pressing INPUT button on Plasma
Monitor's Front Control.
AV 1 (VIDEO 1)
AV 2 (VIDEO 2)
COMPONENT
RGB 1
RGB 2
PC
COMPONENT
button
PC/RGB
button
NOTE :
By pressing the STATUS button on Remote Control Unit, Video
source and OFF TIMER's remaining time (if OFF TIMER is set) will be
displayed for 5 seconds.
NOTE :
"RGB 1" input is compatible with PC input signals.
"RGB 2" is provided for 21-PIN RGB Video signals. When the
connection of 21-PIN video signals is on, "RGB 2" should be selected.
RGB 2