Sanyo PDP-32H1EN - Manual (Page 27)

27
SOUND ADJUSTMENT
MUTE
VOLUME
BASIC OPERATION
Press VOLUME (+/–) button(s) on Remote Control Unit or Front
Control to adjust volume. Volume dialog box appears on the screen
for a few seconds.
(+) button to increase volume, and (–) button decreasing.
Press MUTE button on Remote Control Unit to cut off sound. To
restore sound to its previous level, press MUTE button again or press
Volume (+/–) button(s).
SOUND ADJUSTMENT
Volume 15 Volume 15
Indicates the roughly level
of volume.
(yellow)
Mute 15 Mute 15
(red)
Press MENU button and ON-SCREEN MENU will appear. 1
Press button to select "Sound" menu and then press OK
button. "Sound" menu will appear.
2
Press button to select the item that you want to adjust ,and
make adjustment by pressing button.
3
Treble
: Select : Adjust : Select : Adjust
MENU : Return STATUS : Exit
MENU : Return STATUS : Exit
Sound Sound
Treble Treble 0
Bass Bass 0
Balance Balance 0
BBE BBE Off Off
Surround Surround Off Off
"Sound" MENU
Bass
Adjusts the balance of the left and right channels. (From -32 to 32.)
Balance
Set "On" to provide "BBE-ON" sound, and set "Bass" to provide
"BBE Mach 3 Bass-ON" sound.
BBE
Press button to decrease low frequency sound, and button to
increase low frequency sound. (From -32 to 32.)
Press button to decrease high frequency sound, and button to
increase high frequency sound. (From -32 to 32.)
Set "On" to provide a surround (3 dimensional) sound.
Surround
MUTE
WIDE
INPUT
ON-OFF
VOLUME PC/RGB
COMPONENT
OFF TIMER
PICTURE MOVE UP
VIDEO
OK
VOLUME
(+)/(-)
button
MUTE
button
Iicensed by BBE Sound, Inc. under USP4638258
and 482866. BBE and BBE symbol are registered
trademarks of BBE Sound.
Mach3Bass
R