Sanyo PDP-32H1EN - Manual (Page 30)

30
COMPUTER MODE
Power save
Enable or disable Power save function.
Enable Power save by choosing "Yes" with
buttons.
NOTE :
●
The Power save function automatically reduces the Plasma
Monitor's power consumption if the computer is not operated for a
certain period of time. This function can be used when using the
Plasma Monitor with a computer conforming to the VESA DPMS
standard.
●
To activate power save, computer setup is also needed. (Refer to
Computer Operation manual. )
: Adjust : Adjust
MENU : Return STATUS : Exit
MENU : Return STATUS : Exit
PC mode adjustment PC mode adjustment
Power save Power save Yes Yes
Information
Indicate the input signal information.
Information 1024 x 768 FH: 58.03kHz
FV: 72.00 Hz
PC mode adjustment
MENU : Return STATUS : Exit