SMC Networks SpacePC 1232 Series - Manual (Page 19)

19
19
The audio output is based on two signals: one come from the output of Timer 2, and the
other come from I/O port 61h compliant with the AT Standard.
ƒ Power button
If the soft power management is enabled, a low signal in the pin10 turns the system on or
off.
J14 Mouse Connector
A PS/2 compatible mouse can be connected to the J14 connector (4pins, 2-mm step).
PS/2 Mouse
J14
Figure 7. J14 Connector layout
The J14 pin out is given below.
Table 5. J14 for Mouse connector
Pin # Signal Function
1 +5V Power supply
2 MSCLK Mouse clock
3 GND Ground signal
4 MDAT Mouse data