SMC Networks SpacePC 1232 Series - Manual (Page 44)

44
Option Description Note
Disabled (*) No device selected (*) = Default setting
Disk On Chip Solid-state memory device - size: 2 ... 144 MB
PEROM 512 KB Programmable and Erasable ROM -size 512 KB
SRAM 512 KB Static RAM - size 512 KB
DiskOnChip Map
This option allows to chose the starting address of Disk On Chip (DOC) memory window
Option Description Note
0CC000h The starting address is 0CC000h
0D0000h The starting address is 0D0000h
0D4000h The starting address is 0D4000h
0D8000h The starting address is 0D8000h
0DC000h The starting address is 0DC000h
0E0000h The starting address is 0E0000h
0E4000h The starting address is 0E4000h
0E8000h (*) The starting address is 0E8000h (*) = Default setting
IMPORTANT NOTE: With Win NT
Keyboard
If the keyboard is not really necessary in the system, you can disable it. In this way the system
can bootstrap ignoring the keyboard.
Option Description Note
Not Present (*) Keyboard presence ignored Useful for embedded systems
(*) = Default setting
Present BIOS look for keyboard
Quick Boot
With quick boot enabled, the system takes less than 5 seconds for a bootstrapping. This
improvement is obtained to the disadvantage of BIOS tests (the setup must be correct and the
peripheral must be connected to the module and ready at the boot); in particular the following test
are skipped:
ƒ system memory pattern test
ƒ keyboard detection
ƒ floppy disk presence (seek test)