SMC Networks SpacePC 1232 Series - Manual (Page 45)

45
45
ƒ RTC time test
Option Description Note
Disabled (*) Normal BIOS test are used (*) = Default setting
Enabled Reduce set of BIOS test are used
Boot Try Sequence
The Boot Try Sequence allows exchanging the boot disk order among Floppy Disk 1 and Hard
Disk 1.
Option Description Note
FD1 / HD1 (*) Bootstrap starts from the FD1 then try with HD1 (*) = Default setting
HD1 / FD1 Bootstrap starts from the HD1 then try with FD1
DRAM Memory Speed
The working speed of the DRAM memory can set as follows:
Option Description Note
Low (*) Low speed whit minimal power consumption (*) = Default setting
High High speed for maximum performance
Devices Page
This page controls all the on-board system-devices; in particular:
ƒ Floppy Disk Controller
ƒ EIDE Ports
ƒ Video memory
ƒ Network Adapter
ƒ PS/2 Mouse
ƒ USB
ƒ Audio
ƒ MPU-401