Connecting the aerial 5. switching on the tv – Sony FD Trinitron KV-32DX30U User Manual
Page 10
6
Getting started
4. Connecting the aerial
5. Switching on the TV
R/D/D/D
L/G/S/I
1
S
2
2
L/G/
S/I
R/D/
D/D
C
S
S
3
MODEM
OUT
IN
AERIAL
ANTENNA
AC IN
Integrated Digital TV
D
D
D
DOLBY SURROUND
PRO . LOGIC
Integrated Digital TV
D
D
D
DOLBY SURROUND
PRO . LOGIC
R/D/D/D
L/G/S/I
1
S
2
2
L/G/
S/I
R/D/
D/D
C
S
S
3
MODEM
Connect your existing aerial to the socket
marked
on the rear of the TV.
Connect the TV plug to the mains socket
(220-240V AC, 50Hz) and switch on.
Push in the on/off switch on the front of the TV.
1 Connect your existing aerial to the upper
socket marked
on the rear of the TV as
shown.
2 Connect a lead from the RF input of your
VCR to the lower aerial socket marked
on
the TV.
3 Connect the VCR to the mains socket and
switch on.
4 Insert a pre-recorded tape into the VCR and
press the ‘PLAY’ button. This enables the TV
set to locate and store the video channel
during the ‘Automatically tuning the TV’
procedure.
Connecting an aerial to your TV
Connecting an aerial and VCR to your TV
Scart lead
(not supplied)