Sony FD Trinitron KV-32DX30U - Manual (Page 9)

5
Getting started
3. Connecting your own speakers
R/D/D/D L/G/S/I
1 S 2 2
L/G/
S/I
R/D/
D/D
C
S
MODEM
3
L/G/
S/I
R/D/
D/D
C
S
S
This TV has been designed to create ‘Virtual Dolby Surround’ without the need for additional speakers. If however, you wish
to experience the full Dolby Pro Logic Surround, you will need to connect your own speakers (SS-CR190 or equivalent) as shown
below. Connect the striped speaker leads to the red terminals and the black leads to the black terminals.
Dolby* Pro Logic Surround normally requires 5 speakers:
Centre Speaker - to anchor the fixed sounds, like dialogues, to the screen.
Left and Right Front Speakers - for the normal two channel stereo or bilingual broadcasts.
Surround Speakers - for the special effects created by the surround channels.
* Manufactured under licence from Dolby Laboratories. ‘Dolby’, ‘Pro Logic’, and the double-D symbol are trademarks
of the Dolby Laboratories .
** For the best sound effects, place the surround speakers one meter above your listening position.
You
r Si
tting
Pos
itio
n
Surround speakers **
Right speaker
Note: When you connect your own external left and right speakers you must mute the internal speakers by pressing in
the button marked
on the rear of the TV.
Connect black leads
to the black
terminals of socket Connect striped leads
to the red terminals
of socket
Striped
lead Black
lead
Left speaker
Centre speaker
NOTE: External speakers
should have an impedance
of 8 Ohms