Sony FD Trinitron KV-32DX30U - Manual (Page 13)

9
Overview
Overview of the remote control buttons
RM-888
MENU
PROGR
To temporarily switch off TV
Press to temporarily switch off TV. Press again to
switch on from standby mode. To save energy, we
recommend switching off completely when the TV is
not in use.
NOTE: After 15-30 minutes without a TV signal and
without any button being pressed, the TV switches
automatically into standby mode.
To select input signal or freeze teletext
Press to select inputs from the TV sockets (see Using
Optional Equipment section). In teletext mode, press
to freeze the displayed page. Press once again to
cancel.
To exit digital teletext or return to previous
channel
Press to exit digital teletext, or in TV mode, press to
return to the previous channel you were watching.
Note: This can be done only if you have watched the
previous channel for at least 5 seconds.
To display the menu
Press to use the TV menu system. Press again to
remove the menu from the TV screen.
To select menu items
Use these buttons and the OK button to select the
options available when in the menu system of this TV.
Pressing the OK button in normal TV mode will
display the channel listing table.
To change screen format
Press to change the size of the screen.
See Teletext section of manual for details.
To select channels
Press to select channels.
To mute sound
Press to mute TV sound. Press again to
restore the sound.
To reveal on screen information
Press to reveal all on-screen indications.
Press again to cancel. In teletext mode,
press to reveal concealed information (e.g.
answers to a quiz) then press again to
cancel.
To select channels
Press the numbered buttons to select
channels.
For double digit programme numbers,
e.g.23, press -/-- first, then the buttons 2 and
3. If you enter an incorrect first digit, select
-/-- button again to enter the programme
number of your choice.
To select EPG
Press to display the Electronic Programme
Guide. Press again to remove display.
To select Teletext
Press to switch on Teletext.
To display picture menu
Press to change the picture settings. Press
the OK button to remove the display.
To display sound menu
Press to change the sound settings. Press the
OK button to remove the display.
To adjust TV volume
Press to adjust the volume of the TV.