Sony FD Trinitron KV-32DX30U - Manual (Page 33)

29
RM-888
MENU
PROGR
1 2 3
4 5 6
7 8 9
0
OK
/
Electronic Programme Guide
Electronic Programme Guide (EPG)
Tue 22 DEC
15:45:40 12
Manual Timer Setup
Return
DATE
THU 24 DEC 16
START STOP PROG NO
: : 00 10
v
V
-- --
Setting the manual timer
1 Press the button on the remote control to display the EPG
on the TV screen.
2 Press the B or b button to highlight the 'programme type'
column then press the v button to select the timer symbol
.
3 Press the OK button to display a screen of 9 programme
slots, each one indicating that it is either free for
programming, or that it has a programme already stored in
it.
4 Press the B button to enter the 'programme' column.
5 Press the V or v button to select a free row then press the
OK button to display the Set Timer screen. This screen asks
you to confirm the date, programme number, start time and
stop time.
6 Press the V button to select the date area then press the V or
v buttons on the remote control to enter the date.
7 Press the b button to confirm the date then press the V or v
button to select the month.
8 Press the b button to confirm the month and to select the
start time.
9 Press the V or v buttons to enter the time when you want
the timer to switch on, preferably several minutes before
your video recorder is due to start recording.
Press the
b button to confirm after each entry.
10 Press the V or v buttons to enter the time you want the
timer to switch off, preferably after your video is due to stop
recording.
11 Press the b button to confirm each entry, then press the V
or v buttons to select the programme number.
12 Press the OK button to save the settings, then follow the
on-screen instructions until you finally select to
return to the Manual Timer Setup menu.
13 Select another available slot if you wish to record a further
programme. Otherwise, press the b button to enter the
'programme type' column then press the OK button to return
to the EPG.
14 If you have finished viewing programmes on your TV, press
the button before the timer recording starts. This will
leave your TV in standby mode for the timer settings to be
activated. If, however, you wish to continue watching other
programmes after setting a timer, you can do so by changing
programmes in the normal way. If you are watching another
programme when the timer is due to start, the display shown
will appear on screen.
15 If you do not wish to view the recording, press the
button whilst the display is still on screen to leave your TV
in standby mode. The standby indicator on the front of the
TV will flash to show that the timer record operation is
active. If, however, you choose to change programmes, a
display appears asking if you wish to cancel the recording.
Select Yes or No using the
V or v buttons, then press OK
to confirm your choice.
/
/