Sony STR-DG920 - Manual (Page 41)

41 US
Ge
tting Star
te
d
1
Press GUI MODE.
“GUI MODE” appears on the display and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
“Settings”, then press or b.
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
“Auto Calibration”, then press
or b.
4
Press V/v repeatedly to select
“Auto Calibration Start”, then
press
or b.
5
Press to select “START”.
6
The measurement starts in five
seconds.
7
Measurement starts.
The measurement process will take
approximately 30 seconds with a test
tone. Wait until the measurement process
completes.
Tip
The measurements may not be performed correctly
or Auto Calibration cannot be performed when
special speakers, such as dipole speakers are used.
To cancel the measurement
The measurement will be canceled when you
do the following:
– Press ?/1, input buttons or MUTING.
– Press SPEAKERS (OFF/A/B/A+B) on the
receiver.
– Change the volume level.
– Connect the headphones.
Performing Auto Calibration
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
RESOLUTION
XM
MENU
RETURN/
EXIT
OPTIONS
TOOLS
HOME
DISPLAY
GUI
MODE
O
INPUT
MODE SLEEP
NIGHT
MODE
2-5
1
MENU