Sony STR-DG920 - Manual (Page 36)

36 US
Insert two R6 (size-AA) batteries in the
RM-AAP023 remote commander.
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace the batteries, the programmed
remote codes may be cleared. If this happens,
program the remote codes again (page 99).
Tip
Under normal conditions, the batteries should last
for about 3 months. When the remote no longer
operates the receiver, replace all the batteries with
new ones.
7: Operating the receiver
using the GUI
(Graphical User Interface)
You can change the display mode of the
receiver menu to the screen mode using the
following procedures. In the screen mode,
“GUI MODE” appears on the display of the
receiver.
By using the GUI menu, you can make various
settings and adjustments.
Refer to “Operating without connecting to the
TV” (page 89) if you are not going to use a
GUI menu.
Note
GUI menu does not appear on the TV screen when
you have connected your TV to the MONITOR
VIDEO OUT jack.
Inserting batteries into the
remote
Displaying the GUI menu on the
TV screen
1 2 3
4 5 6
7 8 9
-/-- 0/10 ENT/MEM
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
THEATER
SYSTEM STANDBY
?/1
CLEAR />10
SHIFT TV
– CATEGORY +
RESOLUTION
. >
VIDEO 1 VIDEO 2 BD
SAT TV
PHONO
XM
MULTI IN DMPORT
MD/
TAPE
SA-CD/
CD TUNER
< <
MENU
AV ?/1
RETURN/
EXIT
OPTIONS
TOOLS
HOME
DISPLAY
GUI
MODE
O
DVD
INPUT
MODE SLEEP
NIGHT
MODE
RM SET UP
AMP
5
3
4
MENU