Sony STR-DG920 - Manual (Page 89)

89 US
O
the
r Op
er
atio
ns
Operating without
connecting to the TV
You can operate this receiver using the display
even if you do not use a GUI when a TV is not
connected.
Press GUI MODE repeatedly to
select “GUI OFF”.
When “GUI MODE” is displayed in the
display, the menu is set to display on the TV
screen using a GUI.
1
Press AMP.
2
Press MENU.
3
Press V/v repeatedly to select
the menu you want.
4
Press or b to enter the
menu.
5
Press V/v repeatedly to select
the parameter you want to
adjust.
6
Press or b to enter the
parameter.
7
Press V/v repeatedly to select
the setting you want.
8
Press to enter the setting.
To return to the previous
display
Press B.
To exit the menu
Press MENU.
Note
Some parameters and settings may appear dimmed
on the display. This means that they are either
unavailable or fixed and unchangeable.
Navigating through menus on
the display