SUPER MICRO Computer I2DMR-8G2 - Manual (Page 25)

Chapter 2: Installation
2-5
1. Insert the Itanium 2 CPU into the CPU1 Socket. Make sure that CPU Pin
1 is aligned with the cut angle of the CPU socket. (*See Note) as shown
in the picture below:
D. Installing and securing the Itanium 2 CPU onto the
motherboard
Itanium 2 CPU
CPU1 Socket
2. Use an M2.5 Hex Key to secure the Itanium 2 CPU as shown in the
picture below:
Use an M 2.5 Hex Key
to secure the CPU.
(*Notes: Please refer to Chapter 1 Page 1-4 for the locations of CPU1
Socket and CPU2 Socket.)
3. Repeat Step 1 and Step 2 to install the second Itanium2 CPU as
needed. (*See Note)