SUPER MICRO Computer I2DMR-8G2 - Manual (Page 55)

Chapter 4: AMI BIOS
4-7
ATA(PI) Detect Time Out
The feature allows AMI BIOS to set the time out value for detecting ATA(PI)
devices . The options are:"0", "5", "10", "15", "20", "25" and "30."
This feature allows the BIOS to auto-detect 80Pin ATA(PI) Cable. The op-
tions are:"Host & Device", "Host" and "Device."
ATA(PI) 80Pin Cable Detection
This item allows the user to configure the system's boot settings.
! ! ! ! ! BIOS Settings Configuration
Quiet Boot
Set this value to allow the boot up screen options to be modified between
POST messages or OEM logo. The default setting is Disabled. Select Dis-
abled to allow the computer system to display the POST messages. Select
Enabled to allow the computer system to display the OEM logo.