SUPER MICRO Computer I2DMR-8G2 - Manual (Page 54)

4-6
S UPER i2DMR-8G2/i2DMR-iG2 User’s Manual
S.M.A.R.T. For Hard disk drives
Self-Monitoring Analysis and Reporting Technology (SMART) can help pre-
dict impending drive failures. Select "Auto" to allow BIOS to auto detect
hard disk drive support. Select "Disabled" to prevent the BIOS from using
the S.M.A.R.T. Select "Enabled" to allow the BIOS to use the S.M.A.R.T. to
support hard drive disk. The options are "Disabled", "Enabled", and "Auto."
32Bit Data Transfer
Select "Enabled" to activate the function of 32-Bit data transfer. Select
"Disabled" to deactivate the function. The options are "Enabled" and "Dis-
abled".
the BIOS to use Ultra DMA mode 1. It has a data transfer rate of 25 MBs.
Select UDMA2 to allow the BIOS to use Ultra DMA mode 2. It has a data
transfer rate of 33.3 MBs. Select UDMA3 to allow the BIOS to use Ultra DMA
mode 3. It has a data transfer rate of 66.6 MBs. Select UDMA4 to allow the
The Options are "Auto","SWDMA0", "SWDMA1", "SWDMA2", "MWDMA0",
"MWDMA1", "MWDMA2","UDMA0", "UDMA1", "UDMA2", "UDMA3" and
"UDMA4".
The feature allows the BIOS to set ARMD Emulation type. The options
are:"Auto", "Floppy" and "Hard Disk."
ARMD Emulation Type
allow the BIOS to use Single Word DMA mode 0. It has a data transfer rate
of 2.1 MBs. Select SWDMA1 to allow the BIOS to use Single Word DMA
mode 1. It has a data transfer rate of 4.2 MBs. Select SWDMA2 to allow the
BIOS to use Single Word DMA mode 2. It has a data transfer rate of 8.3
MBs. Select MWDMA0 to allow the BIOS to use Multi Word DMA mode 0. It
has a data transfer rate of 4.2 MBs. Select MWDMA1 to allow the BIOS to
use Multi Word DMA mode 1. It has a data transfer rate of 13.3 MBs. Select
MWDMA2 to allow the BIOS to use Multi-Word DMA mode 2. It has a data
transfer rate of 16.6 MBs. Select UDMA0 to allow the BIOS to use Ultra DMA
mode 0. It has a data transfer rate of 16.6 MBs. It has the same transfer
rate as PIO mode 4 and Multi Word DMA mode 2. Select UDMA1 to allow
Select Auto to allow the BIOS to auto detect the DMA mode. Use this value
if the IDE disk drive support cannot be determined. Select SWDMA0 to
DMA Mode
BIOS to use Ultra DMA mode 4 . It has a data transfer rate of 100 MBs.