SUPER MICRO Computer I2DMR-8G2 User Manual
Page 68
5-6
S
UPER i2DMR-8G2/i2DMR-iG2 User's Manual
1. Power on the system and go into the “EFI Boot
Manager”
2. Select “Boot Option Maintenance Menu."
3. Select “Add a Boot Option.”
4. Select “Removable Media Boot [Acpi(PNP0A03,0)/
Pci(1F|1)/ATA(Secondary,Master)]”
(* Please note: if your CDROM drive is connected to the
primary IDE connector, you must choose it accordingly.)
5. Enter a new description such as “CDROM.”
6. When asked: “Enter Boot Option Data", type [A-Ascii U-
Unicode N-No boot Option]:” Then, press <Enter>.
7. When asked: “Enter bootOption Data, type [Data will be
stored as Unicode string:]” Then, press <Enter>.
8. When asked: “Save changes to NVRAM [Y-Yes N-No]:”,
press Y
9. Select "Exit" option to exit the "Add Boot option menu".
10.Select the "Exit" option to exit the "Boot Maintenance
Menu"
11.Once you’re back to the EFI Boot Manager, you now
can select the CDROM boot option to boot from the OS
installation CD.
Brief instruction for adding the "CDROM" boot
option in EFI: