Sony CMT-J3MD - Manual (Page 19)

Basic Operations
19
3
Press TUNING + or – to select the
desired preset station.
Preset number and frequency (or station
name* or RDS station name**)
* The station name appears only if you have
labelled the station (see page 59).
** European model only.
When you preset only one station, “ONE
PRESET” appears in the display.
To Do this
Turn off the radio Press ?/1 to turn off the
system.
Adjust the volume Turn VOLUME.
To select the preset number
using the remote
Press the number buttons on the remote in step 3.
To enter preset numbers 10 or over, press >10 and
the preset number. To enter 0, use the 10/0 button.
Listening to non-preset radio
stations
• Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press
TUNING + or – to tune in the desired station
(
Manual Tuning ).
• Press TUNING MODE repeatedly until
“AUTO” appears in step 2, then press TUNING
+ or –. The frequency indication changes and
the scanning stops when the system tunes in a
station (
Automatic Tuning ).
To cancel Automatic Tuning
Press TUNING MODE.
Tips
• Pressing TUNER/BAND when the system is off
automatically turns on the system and tunes in the
last received station (
One Touch Play ).
• You can switch from another source to the tuner
just by pressing TUNER/BAND ( Automatic
Source Selection ).
• To improve broadcast reception, adjust the supplied
aerials, or connect a commercially available
external aerial (see page 65).
• When an FM stereo programme has static noise,
press STEREO/MONO until “MONO” appears.
There will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.