Sony CMT-J3MD - Manual (Page 73)

Additional Information
73
TUNER
Cannot Edit
You tried to label or erase a non-preset station.
CD
Cannot Edit
You tried to label a CD TEXT disc.
Name Full
There are already 50 disc titles stored in the
system.
—OVER—
You have reached the end of the CD while
keeping pressing ML during play or
pause.
TAPE
Cannot SYNC!
There is no tape in the tape deck, or the tab has
been removed from the cassette.
No TAB
You cannot record the tape because the tab has
been removed from the cassette.
No tape
There is no tape in the tape deck.
Name Full
There is no more space to store track or disc
titles.
No Disc
There is no disc in the MD deck.
No Name
You tried to show the title of a non-labelled
disc or track.
—OVER—
You have reached the end of the MD while
keep pressing ML during playing pause.
Push STOP!
You pressed PLAY MODE during play.
—Rehearsal—
The MD is playing the specified dividing point
for confirmation during the Divide function.
Smart Space
The signal was input again after silence
continued for 3 or more but less than 30
seconds during digital recording.
Standby (flashing)
The timer settings have disappeared over time
and are not available for saving to disc, or
Program Play could not be activated since the
program has disappeared over time.
Text Protect
There is CD TEXT information which cannot
be recorded on the MD.
TOC Reading
The MD deck is reading the TOC information
of the MD.
TOC Writing
The MD deck is writing the information of
recorded or edited contents.
Track End
You have reached the end of the track while
adjusting the dividing point during the Divide
function.