Sony CMT-J3MD - Manual (Page 75)

Additional Information
75
Parts descriptions for
the remote
You can use the supplied remote to control the
system.
Note
You cannot perform the following operations with the
remote;
— TUNING MODE setting for the tuner
— STEREO/MONO setting for the tuner
— Removing discs
— Recording on the MD or the tape
— One Touch Play
x
. >
H
`/1
X
M m
1
2
3
4
5
1 ? / 1 (power) switch
2 CLOCK/TIMER SELECT button
Press to check timer settings, or to set the timer
on/off. (pages 62 and 64)
CLOCK/TIMER SET button
Press to set the clock and timer functions. (pages
6, 61, 63)
Speaker (SS-CJ3MDS/MDW/MDX)
Speaker system 2-way, bass-reflex type
Speaker units
Woofer:
12 cm dia., cone type
Tweeter: 2.5 cm dia., balanced drive type
Nominal impedance 6 ohms
General
Power requirements
European model:
230 V AC, 50/60 Hz
Other models: 220 V AC, 50/60 Hz
Power consumption 70 watts during normal operation
Approx. 3 watts in standby mode
(clock displayed)
Approx. 1 watt in standby mode
(clock not displayed)
Dimensions (w/h/d) incl. projecting parts and controls
Amplifier/Tuner/Tape/MD/CD section:
Approx. 175
Ч
250
Ч
320 mm
Speaker: Approx. 156
Ч
250
Ч
245 mm
Mass
Amplifier/Tuner/Tape/MD/CD section:
Approx. 6.1 kg
Speakers: Approx. 3.0 kg net per speaker
Supplied accessories Remote (1)
R6 (size AA) batteries (2)
AM loop aerial (1)
FM lead aerial (1)
Speaker cords (2)
Design and specifications are subject to change
without notice.
continued