Sony KD-34XBR970 - Manual (Page 11)

4
SE
TUP
SE
TUP
SETUP
SET
U
P
Setu
p
SETU
P
KD-34XBR970
2-671-222-21(1)
Rear Panel
3
4
1
2
5
6
7
DIGITAL
AUDIO
OUT
DIGITAL
AUDIO
OUT
PCM/ PCM/
DOLBY DIGITAL
DOLBY DIGITAL
Jack Description
1 S VIDEO IN 1/3 Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than either composite video (
2 )
or VHF/UHF ( 7 ) connections.
2 VIDEO IN 1/3
VIDEO/L(MONO)
-AUDIO-R Connect to the composite A/V output jacks on your VCR or other video
component. A third composite A/V input jack (VIDEO 2) is located on the front
panel of the TV. This video connection provides better picture quality than the
VHF/UHF (
7 ) connection.
3 DIGITAL AUDIO OUTPUT
(DOLBY DIGITAL PCM) Connect to the Digital audio input of an audio component that is Dolby* Digital and
PCM compatible.
4 AUDIO OUT (VAR/FIX) Connects to the left and right audio input jacks of your audio or video equipment.
You can use these outputs to listen to your TV’s audio through your stereo system.
5 HD/DVD IN 4/5
(1080i/720p/480p/480i) Connect to your DVD player’s or digital set-top box’s component video (YP B P R )
and audio (L/R) jacks. Component video provides better picture quality than 1 ,
2 , or 7 ).
6 HDMI
(VIDEO 6 IN) HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped
audio/video component, such as a set-top box, DVD player, and A/V receiver.
HDMI supports enhanced, or high-definition video, plus two-channel digital audio.
7 VHF/UHF RF input that connects to your VHF/UHF antenna or cable box.
* Dolby and the double-D symbol are trademarks of Dolby Laboratories.