Sony KD-34XBR970 - Manual (Page 24)

17
SE
TUP
Setu
p
SETUP
SE
TUP
SETU
P
SETU
P
KD-34XBR970
2-671-222-21(1)
DVI-Equipped
Device If you have a device, such as an HDTV receiver, that has DVI (Digital
Video Interface) output, use the following connection.
To connect a device that has DVI OUT:
1 Use an HDMI-to-DVI cable to connect the device’s DVI OUT jack
to the TV’s HDMI IN jack.
2 Use an audio cable to connect the device’s audio output jacks to
the TV’s HDMI analog audio input jacks.
Note on Using This Connection
✍
You can purchase HDMI cables (or cable adapters) at your local electronics
store.
To Do This ... Do This ...
Watch the DVI device Press TV/VIDEO repeatedly to select the VIDEO 6 input.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on page 45.
DIGITAL
AUDIO
OUT
DIGITAL
AUDIO
OUT
PCM/ PCM/
DOLBY DIGIT
DOLBY DIGITAL AL
TV
HDTV Receiver
HDMI-to-DVI cable
Audio cable