Sony KD-34XBR970 - Manual (Page 21)

14
SE
TUP
SE
TUP
SETUP
SET
U
P
Setu
p
SETU
P
KD-34XBR970
2-671-222-21(1)
DVD Player with
Component Video
Connectors For best results, use this connection if your DVD player has
component video (YP
B P R ) jacks.
To connect a DVD player with component video connectors
1 Use three separate component video cables to connect the DVD
player’s YP
B
P
R
jacks to the YP
B
P
R
jacks (VIDEO 4) on the TV.
2 Use an audio cable to connect the DVD player’s audio output
jacks to the TV’s VIDEO 4 audio input jacks.
Notes on Using This Connection
✍
The YP B P R jacks on your DVD player are sometimes labeled Y, C B
and C R , or Y, B-Y and R-Y. If so, connect the cables to like colors.
To Do This ... Do This ...
Watch the DVD player Press TV/VIDEO repeatedly to select the DVD input (VIDEO 4 in the
illustration).
Set up the TV remote control
to operate the DVD player If you have a non-Sony DVD player, you must program the remote control.
See “Programming the Remote Control” on pages 24-25.
Activate the TV remote
control to operate the DVD
player Press VCR/DVD FUNCTION .
Control DVD functions with
the TV remote control See “Operating a DVD Player” on page 27.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on page 45.
DIGITAL
AUDIO
OUT Component video cables
Audio cable
TV
DVD player
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
✍
You cannot record the signal from any equipment connected into the YP B P R
jacks.