Sennheiser CONFERENCE SYSTEM SDC 8000 - Manual (Page 13)

The components of the SDC 8000 system in detail
13
The components of the SDC 8000 system in detail
The components described on the following pages are available for the
SDC 8000 conference and interpretation system. The components you
require depend on the desired size and use of the SDC 8000 system.
Your conference and interpretation system can comprise the following
consoles:
y two types of conferences consoles
y the delegate units for the conference participants
y the chairman unit for the chairman
y the interpreter consoles
In addition, your conference and interpretation system must comprise:
y at least one central unit
Optionally, you can connect the following components:
y an analog output unit
y a control panel
y a special “ambient sound” conference console
The consoles
Six conference console versions with varying levels of functions as well as
an interpreter console are available.
All consoles feature:
y a built-in loudspeaker via which the floor channel is output
y a MICRO key for activating the microphone
y a microphone – if the microphone is active, the red signal light ring and
the “Microphone active” LED light up permanently
y a headphone connection with headphone volume control
The chairman units (SDC 8000 C, SDC 8000 CC and SDC 8000 CV)
additionally feature:
y a PRIOR. key for turning off all active delegate units
y a NEXT key for assigning the “speaking right” to the next participant
who has made a request to speak (SDC 8000 C and SDC 8000 CC only).
Conference consoles with channel selection keys (SDC 8000 DC, SDC 8000 CC,
SDC 8000 DV and SDC 8000 CV) feature:
y a 2-digit LED channel display for displaying the selected interpretation
channel and two channel selection keys (“CHAN.
̆
” and “CHAN.
̄
”) for
selecting the interpretation channel.
The selected interpretation channel is output via connected headphones.
Conference consoles with voting function (SDC 8000 CV and SDC 8000 DV)
feature:
y five voting keys with LEDs