Sennheiser CONFERENCE SYSTEM SDC 8000 - Manual (Page 37)

Operating the components of the SDC 8000 system
37
Working with the central unit’s operating menu
To choose a menu item from the central unit’s operating menu:
̈
Make sure that the central unit is turned on and that all conference/
interpreter consoles are connected.
The start display appears, showing the current volume setting for the
consoles’ built-in loudspeakers (see “Setting the volume of the
consoles’ built-in loudspeakers” on page 76) and to which of the
central unit’s ports P1 to P6 a cable string is connected (see “Making a
system diagnosis” on page 98).
̈
Press the ENTER key
²
.
You get to the first main menu “ Conference ”.
̈
Turn the jog wheel
¿
until the desired main menu is shown on the
display and press the ENTER key ² .
You enter the desired main menu.
̈
Turn the jog wheel
¿
until the desired submenu is shown on the
display and press the ENTER key
²
.
You enter the desired submenu where you can choose between
additional submenu items by using the jog wheel
¿ or choose a setting
(in this case, the current value and the text “Press ENTER to Save” are
shown on the display).
̈
To change the current value:
Turn the jog wheel
¿
until the desired value is shown on the display
and press the ENTER key
²
.
The new value is saved and you return to the previous menu level.
̈
To keep the current value unchanged:
Press the EXIT key
´ .
The current value remains unchanged and you return to the previous
menu level.
̈
To exit the central unit’s operating menu, press the EXIT key
´
repeatedly until the start display appears.
>Volume =
P1 P2 P3 P4 P5 P6
¿ ² ´