Sennheiser CONFERENCE SYSTEM SDC 8000 - Manual (Page 46)

Structuring the SDC 8000 system
46
The signals of up to three interpretation channels are available at the
outputs AUX OUT 3-4-5 of the 9-pole sub-D socket.
Additional interpretation channels can be output via the XLR-3M audio
outputs of an SDC 8000 AO analog output unit connected to the central
unit.
Transmitting the floor channel or an interpretation channel
via a PA system
Via the central unit’s XLR-3M audio output or via an audio output of the
SDC 8000 AO analog output unit, you can connect a PA system via which
the floor channel or an interpretation channel can be transmitted to e.g.
the foyer or another room.
For information on how to select the channel to be output via an audio
output, see “Assigning a channel to an audio output” on page 95.
Transmitting the floor channel and the interpretation channels via an
infrared transmission link
You can connect the control of an infrared transmitter to the central unit,
allowing guests or participants who don’t have their own conference
console to follow the conference via infrared headphones. These guests or
participants can choose between the floor channel and the interpretation
channels.