Sharp DK-CL5P - Manual (Page 11)

11
2010 November 3 DK-CL5P_A6 02-27.fm
DK-CL5P
Pr
epa
rat
io
n for Use
■ Install/Replace batteries Notes:
● The battery system is use to provide continuous alarm
operation and clock setting in event of a power failure. Please
make sure the AC/DC adaptor is connected, otherwise all
setting may be lost during battery replacement.
● Remove the batteries if the unit will not be used for a long
period of time to prevent battery leakage which may cause
potential damage.
● Connecting the AC/DC adaptor to the unit disconnects the
batteries.
● The first time the batteries is install, the clock will blinking on
the display. Please set the time and date (refer page 15).
Note:
Battery life may vary depending on the temperature, battery
types and usage conditions.
Precautions for battery use:
● Installing the batteries incorrectly may cause the unit to
malfunction.
● Insert the batteries according to the direction indicated in the
battery compartment.
● Replace all old batteries with new ones at the same time.
● Do not mix old and new batteries.
● Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
Caution:
Do not use rechargeable batteries (nickeI-cadmium battery, etc.).
Use 6 “C” size batteries (UM-2/R14 or similar).
Batteries are not included.
For Backup battery:
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
1 Open the battery cover.
2 Insert the batteries according to the direction
indicated in the battery compartment.
When inserting or removing the batteries, push them
towards the battery terminal.
3 Close the cover.
–
PU S H OPEN
PU S H OPEN