Display brightness control (dimmer), Volume auto set in, Volume control – Sharp DK-CL5P User Manual
Page 14: Muting, Equalizer, Ba sic o p era ti o n general control (continued)
2010 November 3
General control (continued)
■ Display brightness control (DIMMER)
Press the SNOOZE/DIMMER button to adjust the brightness of
● Setting dimmer to display in the brightest mode during battery
operation will affect battery life.
● During battery operations in standby mode, the brightness of
display will automatically go to the lowest mode (dim OFF)
after 5 seconds.
■ Volume auto set in
If you turn off and on the main unit with the volume set to 17 or
higher, the volume starts at 16.
The volume will muted temporarily when pressing the MUTE button
on the remote control. “L-00” will be blinking on the display. Press
the MUTE button again to restore the volume.
Press the EQUALIZER button repeatedly until the desired
sound mode appears.
■ Volume control
Main unit operation:
Rotate the Volume knob anti-clockwise to
decrease volume and clockwise to
Remote control operation:
Press the VOLUME (+ or –) button to
increase or decrease the volume.
Volume indicator will be blinking when the
volume reaches maximum or minimum
(Display is dim)
(Display gets dimmer)
(Display is bright)
For rock music.
For classical music.
For pop music.
For jazz music.