Speco Technologies PC Pro Series - Manual (Page 100)

92
(4) Channel Settings
The numbers from 01 to 16 represent the camera ID. In Transmitting Channels section, enable the
camera number to receive the camera signal from the server. In Visible Channels section, enable
the camera number to view the camera signal on Remote Console screen. To select all the
cameras, enable the ALL check box.
7.4 Using the Remote Playback
To use this feature, first you need to select the source of the file. In the Select Playback Mode
dialog box, choose Local Playback to open the file that is recorded in the Remote Console, and
Remote Playback
to open the file that is recorded in the DVR server. When you choose Remote
Playback, select RealTime Playback if your internet bandwidth is fast and big enough, otherwise
choose Download and Playback.
Click OK to proceed and Cancel to void this operation.
In the Video Playback Date/Time Selection, the number from 00 to 23 represent the time in
24-hour clock. The numbers from 01 to 16 represent the camera number.