Speco Technologies PC Pro Series - Manual (Page 50)

42
(9) System Configuration
To configure the DVR system date, time and IP address.
Date/Time Setup
1. Select the Time Zone of DVR server located
2. Select the Month and Date. Click arrow button can switch to different month.
3. Adjust the Time by click spin box arrow button.
4. Click OK to save the configuration.
IP Setup
- Obtain an IP automatically (DHCP): To use DHCP server assigning DVR server a IP
address.
- Using the following IP address: Assign a fixed IP address for DVR server
- IP ADDRESS: Assign a constant IP address which a real IP addresses give from ISP
to DVR system.
i Do Not assign the DVR to 1.0.0.0 network segment. It will cause the DVR can
not access to Internet due to the un-recognize to 1.0.0.0 IP segment.
- Mask: It is a bitmask used to identify the sub network and how many bits provide room
for host addresses. Enter the subnet mask of the IP address which user has assigned
to DVR system.
- GATEWAY: A network device act as a passageway to internet. Enter the network
gateway IP address
- DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to IP
addresses. Enter the IP address of DNS if it is available.