Speco Technologies PC Pro Series - Manual (Page 125)

117
basis.
(9) Other Configuration
- UPnP
Enable UPnP function to automatically configure the port setting on the local network.
This function is available when there is UPNP device in the same network. It will write the
DVR port information into the router or other network device
- Enable White List
An access permit list for the remote accessing of DVR server. Enter the IP address and
click Add. Or, enter a range of IP address and click Add. To delete the IP from the list,
select the IP and click Delete button. To reset the input, click Clear button.
- Enable HandyViewer
Enable remote users to use a PDA or a mobile phone to access DVR server and select
the video size and quality. (See also
Chapter 7.5 and 7.6 )
- Network Bandwidth Limit
By Channel: Set the network bandwidth by each channel.
All: Set the total network bandwidth consumption limit.