Sharp JB940 User Manual

Page 35

Advertising
background image

Problem

Possible Causes

What To Do

Control signals after

You forgot to enter a

Touch the BAKE pad and desired temperature or

entering cooking time

bake temperature or

the SELF CLEAN pad and desired clean time.

or start time

cleaning time.

Display goes blank

A fuse in your home may be

Replace the fuse or reset the circuit breaker.

blown or the circuit
breaker tripped.

The clock is in the

See the Special features of your oven control section.

black-out mode.

Display flashes

Power failure.

Reset the clock.

Unable to get the

Oven control pads were

The BAKE and BROIL HI/LO pads must be touched at

display to show “SF”

not touched properly.

the same time and held for 3 seconds.

“Probe” appears in

This is reminding you to

Enter a probe temperature.

the display

enter a probe temperature

(on some models)

after plugging in the probe.

Power outage,

Power outage or surge.

Reset the clock. If the oven was in use, you must reset

clock flashes

it by touching the CLEAR/OFF pad, setting the clock

and resetting any cooking function.

Steam from the vent

When using the convection

This is normal.

feature, it is normal to see
steam coming out of the oven
vent. As the number of shelves
or amount of food being
cooked increases, the amount
of visible steam will increase.

“Burning” or “oily”

This is normal in a new oven

To speed the process, set a self-clean cycle for a

odor emitting from

and will disappear in time.

minimum of 3 hours. See the Using the self-

the vent

cleaning

oven section.

Strong odor

An odor from the insulation

This is temporary.

around the inside of the oven
is normal for the first few times
the oven is used.

Fan noise

A cooling fan or a convection •

This is normal. The cooling fan will turn off and on.

fan (depending on the

The convection fan will run until the function is

function you are using) may

over or the door is opened.

automatically turn on and off
to cool internal parts.

Surface light does

Switch operating light

Call for service.

not work

is broken.

35

Safety Instructions

Operating Instructions

Safety Instructions

Operating Instructions

Care and Cleaning

Troubleshooting T

ips

Customer Service

Advertising
This manual is related to the following products: