Sony CMT-CP33MD - Manual (Page 30)

30
Programing MD tracks
(continued)
Press x, then press PLAY MODE
repeatedly until “PGM” and
“SHUFFLE” disappear.
Perform steps 3 and 4.
Using the MD display
You can check the total number of tracks, the total
playing time and the remaining time on the MD.
x
. >
N
X
M m
DISPLAY
, Press DISPLAY.
Each time you press the button during
normal play or in stop mode, the display
changes as follows:
During normal play
t Elapsed playing time and the track
number on the current track
r
Remaining time and the track number on
the current track
r
Remaining time on the MD
r
Track title of the current track* 1
r
Clock display
r
BASS level
r
TREBLE level
To check the program order
Press . or > repeatedly during Program
Play.
To Do this
Press CLEAR in stop mode. Each
time you press the button, the last
programed track is erased.
To select the desired track using
the number buttons on the
remote
Press number buttons instead of performing steps
3 to 5.
To enter track numbers 10 or over, press >10
(press twice to enter 100 or over) and the track
number. To enter 0, use the 10/0 button.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
N.
• “ProgramFull” appears when you try to program 26
or more tracks (steps).
• “---.--” appears when the total MD program time
exceeds 200 minutes.
Cancel Program
Play
Add a track to
the program (in
stop mode)
Erase the last
programed track