Sony CMT-CP33MD - Manual (Page 32)

32
Before you start recording
(continued)
Recording your favorite
CD tracks on an MD
— CD-MD Synchro Recording
You can select your favorite CD tracks with the
Program Play feature, then record the program on
an MD using the CD Synchro Recording feature.
If you use a partially recorded MD, recording
starts after the recorded tracks.
7 8,9
x
. >
N
`/1
X
M m
2
3
1
3
4
Tab
Slide the tab
• If the MD is record protected, “C11” and
“Protected” appear alternately and the MD cannot
be recorded. Remove the MD, then slide the record
protection tab to the closed position.
After recording
, Press MD Z to remove the MD or press
?/1 (power) to turn off the system.
“TOC” lights up, or either “TOC” or
“STANDBY” starts flashing. The TOC is
updated and recording is completed.
Before pulling out the power
cord
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the system. Do not pull out the power cord
before updating the TOC (while “TOC” is lit) or
while updating the TOC (while “TOC” or
“STANDBY” is flashing) to ensure a complete
recording.
Protecting a recorded MD
• To protect a recorded MD, slide the tab on the side
of the MD to open the slot. In this position, the MD
cannot be recorded. To record on the MD, slide the
tab to close the slot.