2 setup menu operations – Sony DVW-2000 User Manual

Page 110

Advertising
background image

12-2

Setup Menu Operations

Chapter 12

Setup Menus

12-4

Chapter 12

Setup Menus

Resetting the menu settings to their
factory default values (menu item B20)

To reset the current active menu settings to their
factory default values, proceed as follows.

1

Perform steps 1 to 3 of the procedure described in
the section “To change the settings of menu items
without sub-items” on page 12-3 to set menu item
B20 RESET SETUP to ON.

The current active menu settings are reset to their
factory default settings.

2

Press the F5 (SET) button again.

This saves the menu settings.

Menu bank operations (menu items B01 to
B13)

This unit allows menu settings to be saved in what are
termed “menu banks”. Saved sets of menu settings can
be recalled for use as required.

To save the current active menu settings
Set one of menu items B11 SAVE BANK 1 to B13
SAVE BANK 3 to ON, depending on which of the
menu banks you wish to save in, then press the F5
(SET) button.

To recall settings from a menu bank
When recalling the settings saved in one of menu
banks 1 to 3, set the corresponding one of menu items
B01 RECALL BANK 1 to B03 RECALL BANK 3 to
ON, then press the F5(SET) button.
When you wish to recall the settings saved in menu
bank 4, select bank-4 with menu item B20 PRESET
SETUP.

For details about menu bank 4, refer to the Maintenance
Manual.

a)

a)

a)

a)

Current active
menu settings

Recall (B01)

Recall (B02)

Recall (B03)

Save (B11)

Menu bank 1

Menu bank 2

Save (B12)

Save (B13)

Save

Recall (B20)

Menu bank 4

a) Use maintenance menu item 122.

Menu bank 3

Save

Advertising
This manual is related to the following products: