Sony DVW-2000 User Manual

Page 115

Advertising
background image

Chapter 12

Setup Menus

Chapter 12

Setup Menus

12-9

Menu items in the range 100 to 199, relating to the control panels (Continued)

Item number

107

108

109

111

115

116

117

Item name

REC INHIBIT LAMP
FLASHING

AUTO EE SELECT

FORCED EE WHEN
TAPE UNTHREAD

TSO PLAY

PHASE LOCK IN
VARIABLE X3 (DVW-
M2000/M2000P only)

JOG DIAL RESPONSE

CONTROL PANEL
SELECTION

Settings

Select whether or not to flash the REC INHI indicator when the function menu
item RECINH is set to OFF and the record inhibit plug on the cassette is pressed
in.
OFF : Do not flash the REC INHI indicator.
ON: Flash the REC INHI indicator.

When a digital cassette is inserted and the function menu item PB/EE is set to
EE, select the VTR modes in which input video and audio signals are
automatically handled in E-E mode.
When an analog cassette is inserted, regardless of the function menu setting the
PB mode is always selected.
S/F/R : In STOP/EJECT/F.FWD/REW modes
STOP: In STOP/EJECT modes

During tape threading and unthreading, and when no cassette is inserted, select
whether the setting of the function menu item PB/EE controls the PB/EE setting
for output signals.
OFF: Control by the function menu item PB/EE
ON : No control (always E-E signal)

Select whether or not to enable tape speed override mode.
DIS : Disable tape speed override mode.
TSO: Enable tape speed override mode.

Select whether or not to lock the capstan phase in

×3 variable speed play mode

when playing back a Betacam or Betacam SP cassette.
OFF : Do not lock.
ON: Lock.

Select the tape speed characteristics for the search dial rotation rate (VTR
commands).
TYPE1 : Tape speed varies linearly over the range –1 to +1.
TYPE2: Tape speed varies stepwise as shown in the figure below

a)

over the

range –3 to +3. (Characterized by a zone around –1 and +1 where the tape
speed is independent of the search dial rotation rate)

TYPE3: Tape speed varies linearly over the range –3 to +3, as shown in the

figure below

b)

.

TYPE4: Tape speed varies stepwise as shown in the figure below

c)

over the

range –2 to +2. (Characterized by a zone around –1 and +1 where the tape
speed is independent of the search dial rotation rate)

Select the control panel function when the PANEL SELECT switch on the switch
panel is set to REAR.
SW : Only the control panel connected to the CONTROL PANEL connector on

the connector panel functions.

PARA: The control panels connected to the CONTROL PANEL connectors on

the switch panel and connector panel both function.

Speed

Rotation rate

Speed

Speed

Rotation rate

Rotation rate

(Continued)

(reverse)

a)

b)

c)

+3

+1

-1

-3

FWD

FWD

RVS

RVS

+3

-3

FWD

FWD

RVS

RVS

+2
+1

-1
-2

FWD

FWD

RVS

RVS

TYPE 3

TYPE 2

TYPE 4

(forward)

Advertising
This manual is related to the following products: