Sharp VL-WD450U User Manual
Page 23
8
Operation References
Note:
•N indicates a flashing display.
Displayed for
5 seconds
Description of warning
The SmartMedia card is not inserted or is inserted improperly. Check
how the card is inserted (see
page 73
).
The capacity of the SmartMedia card is full and cannot store any more
images. Delete unnecessary images (see
page 81
) or replace the
card with a new one (see
page 73
).
The SmartMedia card has no images recorded in the format the
camcorder can recognize.
The images in the SmartMedia card are corrupted or recorded in a
format which is not compatible with this camcorder. Format the card to
use it with this camcorder (see
page 77
).
The SmartMedia card has not been formatted with this camcorder.
Format the card (see
page 77
).
A SmartMedia card with a write-protect seal is inserted. Remove the
write-protect seal to record images on the card (see
page 89
).
You are trying to delete a protected image. Cancel the protection
setting (see
page 80
).
The selected image cannot be read by this camcorder. Format the
card to use it with this camcorder (see
page 77
).
The SmartMedia card cannot record any data due to a problem with
the card or data on the card. Replace the SmartMedia card (see
page 73
).
NO
MEMORY CARD
MEMORY
FUL L
CARD
NO DA T A ON
MEMORY C ARD
MEMORY C ARD
ERROR
F ORMA T
MEMORY C ARD
MEMORY C ARD
PROT E C T ED
PROT E C T ED
DA T A
MEMORY C ARD
RE AD ERROR
C ANNO T
S T ORE DA T A