Remo t e on – Sharp VL-WD450U User Manual
Page 59
44
Useful Features
3
Press
d
or
y
to select “ON”, then
press
e
.
REMO T E
ON
4
Press the MENU/DISPLAY button to
turn off the menu screen.
Operating the Remote Control
1
Open the LCD monitor completely (
1
),
then rotate it 180° vertically (
2
).
90
180
2
Set the Media Selection switch on the
camcorder to TAPE or CARD.
3
Set the Power switch on the camcorder
to CAMERA or VCR.
4
Aim the remote control at the remote
sensor of the camcorder, and press the
control buttons for operation.
Notes:
• Be careful not to allow direct sunlight or bright
light from interior illumination to fall onto the
remote sensor, as this may prevent the remote
control from operating properly.
• Be sure that there are no obstacles between the
remote control and the remote sensor.
• When the batteries are depleted and the remote
control does not operate, replace them with new
AA (R6 or UM/SUM-3) batteries.
Remote sensor
16 ft
(5 m)
Approximate operating
range of remote control
TAPE REC START/STOP button [
p. 20
]
CARD REC button [
p. 74
]
ZOOM W/T buttons
[
pp. 21, 60
]
REW button [
pp. 23, 78
]
PLAY button
[
pp. 23, 78
]
FF button
[
pp. 23, 78
]
PAUSE/STILL button [
pp. 25, 45
]
STOP button
[
pp. 23, 78
]
SLOW button
[
p. 45
]
Advance/reverse buttons [
p. 45
]
Shift buttons [
p. 60
]
VOL. +/L buttons
[
p. 23
]