Siemens HiPath 4000 - Manual (Page 11)

Make a call – Basic Functions
11
Step by Step
Dialling with the handset on-hook
p Internal: Enter the number.
External: Enter the external code and the number.
The called party answers via the speaker:
n Lift the handset.
The called party is busy or does not answer:
Press the key. The lamp goes out.
Terminating a call
t Replace the handset.
Saved number redial
Precondition: The "redial" key is configured on your
telephone.
If your telephone is configured for this type of redialling,
you can store a number and then dial it at a later point
in time
page 14. You can redial the number at the
push of a button.
n Lift the handset.
Press the key.
or qk UK code.
Last number redial
Precondition: The "last number redial" key is config-
ured on your telephone.
If this type of call forwarding is configured on your tele-
phone, each (last) number dialled is saved automatical-
ly for possible redialling.
n Lift the handset.
Press the key.
Speaker
Redial
Last no. redial